Oroco Commences Phase Two Drilling At Cerro Prieto

July 21, 2009

VANCOUVER, British Columbia – (July 21, 2009) Oroco Resource Corp. (TSX-V: OCO) (“Oroco” or “the Company”) is pleased to announce the commencement of the 2009 field program on its Cerro Prieto Project in northern Sonora, Mexico.

A drill contract has been signed with Cabo Drilling de Mexico S.A. de C.V. and crews are currently in the field preparing for the arrival of the first of two diamond drill rigs that will be used for the 8,000 meters of drilling planned for Oroco’s Phase Two program at Cerro Prieto. The program is focusing on the expansion, on strike to the north, of the previously defined oxide resource. Cerro Prieto’s indicated resource of 7.45 million tonnes, with an average grade of 1.24 g/t Au, 12.8 g/t Ag, 0.41% Pb and 1.04% Zn using a 0.5 g/t gold cutoff (see news release dated May 11, 2009), was calculated following initial drilling on 600 meters of strike length of the mineralized structure. Phase Two drilling will test approximately 1,500 meters of strike length of the structure, where continuity of the mineralized zone has been established by a step-out drill hole and surface trenching completed during 2008, as well as being strongly indicated by the presence of historic mine workings. This resource is hosted in a near vertical shear zone, which is present from surface to a maximum depth of approximately 350 meters, where it transitions to sulphide mineralization. Oxide mineralization was encountered in all holes drilled in Phase One with the exception of the deepest, which encountered sulphide mineralization at a depth of 400 meters from surface. Following Phase One drilling completed by Oroco during 2008, mineralization remains open at depth as well as on strike to the north and south.

Phase Two drill holes will be centered at 100 meter intervals on the plane of mineralization on the approximately 550 meters of strike length remaining to the north boundary of Oroco’s San Felix concession, and will continue northward at 200 meter intervals for approximately 1,000 meters of strike length on the adjacent concession recently optioned by Oroco from Yamana Gold.  Infill drilling at 100 meter intervals will follow as warranted. Twenty-two holes were completed in Phase One, all successfully hitting the targeted mineralized zone, and approximately 40 holes are anticipated to be completed in Phase Two drilling.

Drilling as part of Phase Two will also include a minimum of two holes targeted to test the sulphide zone previously intersected in CP011 (an intersection of 4.2 meters true thickness averaging 0.19 g/t Au, 79.3 g/t Ag, 0.78% Cu, 3.71% Pb and 6.13% Zn contained within 30 metres of true thickness of mineralization) at a depth of 400 meters from surface, and a minimum of two holes under the highly anomalous exposures of the mineralized zone on the Cerro Prieto North property, where sampling of outcropping mineralization yielded individual assays as high as 2.18 g/t Au, 200 g/t Ag, 2.26% Pb, and 3.17% Zn.

It is anticipated that Phase Two drilling will be completed in approximately four months.

The location of Phase One drill holes as well as the area targeted in Phase Two drilling may be found at the Oroco website at https://orocoresourcecorp.com/

Initial metallurgical testing incorporating bottle roll leach tests were successful in extracting up to 91.5% of the contained gold over a 96 hour period (see News Release dated May 11, 2009). Concurrent with Phase Two drilling Oroco will provide coarser samples of ore to be tested by the column leach method in order to determine an optimized metallurgical recovery process. Metallurgical testing is being supervised by consultant, A. H. Winckers & Associates Inc.

The Company is working towards having an updated resource calculation along with the next phase of metallurgical testing completed by the end of 2009.

Oroco is a Canadian-based mineral exploration company with primary focus on the accelerated development of the gold bearing zones of its Cerro Prieto project, a polymetallic (Au-Ag-Pb-Zn) project in Sonora State, Mexico.

The Cerro Prieto project consists of the 100% owned, 2,723 ha, San Felix, San Francisco and Cerro Prieto concessions and 4,120 ha of the connecting Argonauta 5 Fraccion 1 concession to which the Company holds an option to purchase (see May 14, 2009 news release).  During the first field season in 2008, the Company drilled 5,975 metres of core and tabled a NI 43-101 compliant resource estimate and the results of a preliminary metallurgical study (See May 11, 2009 news release).  The Company is moving the Cerro Prieto project forward with the rapid development of mineral resources, further metallurgy studies and the development of a preliminary assessment by an independent mining engineering firm.


For further information, please contact:
Mr. Ken Thorsen, President and CEO
Oroco Resource Corp.
Tel: 604-688-6200


Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Subscribe for Updates

These historical resource estimate models are based upon historical resource estimates prepared by John Thornton in 2011. While, in the opinion of Dane A. Bridge, author of the revised NI 43-101 standard technical report, Geology, Mineralization and Exploration of the Santo Tomas Cu-(Mo-Au-Ag) Porphyry Deposit, Sinaloa, Mexico dated April 21, 2020 (the “Report”), reliable estimation practices were used, in order to upgrade or verify the historical estimations, resampling and assay of historical drill samples, twinning of historical drill holes, and a new program of regularly spaced drilling is required. No qualified person has undertaken sufficient work to classify the current mineral resources or mineral reserves upon which these models are based and the Company is not treating the estimates as current estimates of the mineral resources. The Company gives no assurance that either these models or the historical resource estimates upon which they are based are accurate, and does not undertake any obligation to update the models or to release publicly any update or revisions of the resource estimates except as required by applicable securities law. The reader is cautioned not to rely upon these models or the historical resource estimates upon which they are based.

Please signify your understanding:

I Agree